Using A Microsd Card - Intermec CK3a User Manual

Using a microSD Card

CK3 Mobile Computer User's Manual
• Choose a Predefined mode in Intermec Settings:
a Tap Start > Settings > the System tab > Intermec Settings.
b Tap Data Collection > Internal Scanner > Imager Settings >
Predefined Modes and then select one of these options:
Predefined Mode
1D
1D and 2D
Standard
1D and 2D Bright
Environment
1D and 2D
Reflective Surface
Custom
You can use a micro Secure Digital (SD) card to increase file storage
and install software. You CK3 supports microSD cards that hold up
to 2 GB of information. The microSD card slot is located in the
battery compartment.
To install a microSD card
1 Remove the battery. For help, see
Battery" on page
2 Slide the microSD card cover toward the OPEN position and lift
the cover.
Select if You Are Scanning:
Only 1D labels.
All types of bar code labels.
In high ambient light, such as outdoors in the
sunshine.
Glossy labels.
In conditions that require customized settings.
For more information about these settings,
commands, and parameters, see the Intermec
Settings Command Reference Manual available from
the Intermec web site at www.intermec.com.
"Removing and Installing the
5.
Chapter 1 — Using the Computer
23