Using The Reset Button - Panasonic KX-TAW848 Installation Manual

4.1 Troubleshooting
4.1.4

Using the Reset Button

If the PBX does not operate properly, use the Reset Button. Before using the Reset Button, try the system
feature again to confirm whether there definitely is a problem or not.
CAUTION
In order to avoid possible corruption of data on the SD Memory Card, please ensure that the "SD
ACCESS" LED is off before pressing the Reset Button.
Notes
• When the System Initialize Switch is set to the "NORMAL" position, pressing the Reset Button
causes the following:
– Camp-on is cleared.
– Calls on hold are terminated.
– Calls on exclusive hold are terminated.
– Calls in progress are terminated.
– Call park is cleared.
Other data stored in memory, except the above, are not cleared.
• Be aware that pressing the Reset Button with the System Initialize Switch in the "SYSTEM
INITIALIZE" position clears all data stored in the PBX. Do not perform this operation unless you
intend to delete all data from the PBX.
Operation
If the PBX does not operate properly:
1.
Set the System Initialize Switch to the "NORMAL" position.
2.
Press the Reset Button.
RUN Indicator
ALARM Indicator
116 Installation Manual
Reset Button
System Initialize Switch