2.
Plug the DC connector of the AC adaptor into DC IN 1.
DC IN 1
DC Connector
AC Adaptor
3.
Plug the AC cord into the AC adaptor, and then plug the other end into an AC outlet.
AC Adaptor
To AC outlet
4.
Turn on the power switch. The RUN indicator will flash.
Power Switch
Notes
•
For safety reasons, follow the procedures as indicated when turning on the PBX.
•
For safety reasons, do not stretch, bend, or pinch the AC cord and the DC cable of the AC adaptor.
1
2
AC Cord
2.11 Starting the PBX
Installation Manual
101