Panasonic KX-TAW848 Installation Manual page 48

2.2 Installation of the PBX
Mounting on Concrete or Mortar Wall
CAUTION
Drive mounting screws into the wall. Be careful to avoid touching any metal laths, wire laths or metal
plates in the wall.
1.
Place the reference for wall mounting (on the following page) on the wall to mark the two screw
positions.
2.
Install two anchor plugs (user-supplied) in the wall.
Anchor Plug
Hammer
3.
Install the screws (included) in the wall.
Drive the screw
to this position.
4.
Hook the AC adaptor on the screw heads.
Note
Be careful not to drop the AC adaptor.
48 Installation Manual
110 mm
(4-5/16 in)
6.4 mm
(1/4 in)
29 mm
(1-1/8 in)