Panasonic KX-TAW848 Installation Manual page 87

Using the KX-TD7690
SEL
Select S1
"SYSTEM LOCK".
SEL System Lock Password
ENABLE
S1
DISABLE
ENTR
C.Tone
S1
Setting the Personal Identification Number (PIN) for PS Registration
To prevent registering the PS to a wrong PBX, a PIN for PS registration can be set to the PBX. Before
registering the PS to the PBX, register the PIN set to the PBX into the PS. By doing so, the PS will only be
registered to the PBX with the matching PIN.
Notes
• By default, the PIN for PS registration is "1234" for both the PBX and PS. Therefore, the PS can
be registered to the PBX without setting the PIN.
• The PIN for PS registration will only be used when registering the PS to the PBX. Therefore, even
when there is more than 1 PBX with the same PIN near the PS, the PS will not be linked to a
different PBX during normal operation after registration.
Setting the PIN for PBX
[692]
STORE
Setting the PIN for PS
Using the KX-TD7680
Select
"CHANGE PIN"
Using the KX-TD7690
SEL
Select
S1
"CHANGE PIN"
CHNG
Choose
S1
"Enable/Disable".
ENTR
4 digits S1
PIN for PS Registration
1 to 4 digits
1234
PIN for PS Registration
1 to 4 digits
1234
PIN for PS Registration
1 to 4 digits
1234
2.7 Connection of 2.4 GHz Portable Stations
System Lock Password
4 digits
STORE END
C.Tone
ENTR
C.Tone
S1
Installation Manual 87