Panasonic KX-TAW848 Installation Manual page 85

Registering the PS
The PS must be registered to the PBX before it can be used. Programming of both the PS and PBX is
required. An APT with multiline display (e.g., KX-T7735) is required for the PBX system programming.
Note
For details about system programming using an APT, refer to "2.3.2 PT Programming" and "3.3 PT
Programming" in the Feature Guide.
Entering the System Programming Mode
APT (Administrator Level)
#
PROGRAM/
PAUSE
PS (Using the KX-TD7680)
FUNC
Press POWER
for 2 seconds.
If required
System Lock Password
4 digits
PS (Using the KX-TD7690)
MENU
Press POWER
S1
for 2 seconds.
If required
System Lock Password
4 digits
Note
means default value throughout this section.
System Password for Administrator—
for PT Programming
= 1234
Select
"PS PROGRAM".
System Setting Menu
SEL
Select
S1
"PS PROGRAM".
ENTR
System Setting Menu
S1
2.7 Connection of 2.4 GHz Portable Stations
Programming No.
3 digits
Select
"SYSTEM SET".
SEL
Select
S1
"SYSTEM SETTING".
Installation Manual 85