ProSoft MVI69E-MBS User Manual page 154

Index
User Manual
Master Command List • 73
Master Mode • 72
MBS Controller Tag Overview • 79
MBS.CONFIG • 80
MBS.CONTROL • 80
MBS.CONTROL.CmdControl • 81
MBS.CONTROL.ColdBoot • 84
MBS.CONTROL.EventCmd_DBData • 81
MBS.CONTROL.EventCmd_ProcessorData • 82
MBS.CONTROL.GetStatus • 84
MBS.CONTROL.PortControl • 80
MBS.CONTROL.ResetStatus • 84
MBS.CONTROL.SlavePoll • 83
MBS.CONTROL.Time • 83
MBS.CONTROL.WarmBoot • 84
MBS.DATA • 80
MBS.STATUS • 47, 85
MBS.UTIL • 86
Modbus Application Port Connection • 146
Modbus Master • 105
Modbus Port x Commands • 52, 72, 73
Modbus Port x Parameters • 48
Modbus Slave • 105
Module Communication Error Codes • 100
Module Configuration Parameters • 21, 36, 47
Module Parameters • 47
Monitoring Backplane Information • 97
Monitoring Data Values in the Module's Database • 99
Monitoring Network Configuration Information • 96
MVI69E-MBS Backplane Data Exchange • 63
MVI69E-MBS Controller Tags • 76
MVI69E-MBS User-Defined Data Types • 77
Normal Data Transfer • 28, 65
Package Contents • 11
Pass Module Time to Processor Block (9973) • 143
Pass-through Block for Function 99 (9970) • 142
Pass-through Formatted Block for Function 15 (9959) •
140
Pass-through Formatted Block for Function 23 (9961) •
141
Pass-through Formatted Block for Function 5 (9958) •
139
Pass-through Formatted Block for Functions 6 and 16
with Float Data Block (9957) • 138
Pass-through Formatted Block for Functions 6 and 16
with Word Data Block (9956) • 137
Pinouts • 145
Port x Module Information • 98
Preset Multiple Registers (Function Code 16) • 116
Preset Single Register (Function Code 06) • 112
Printing a Configuration File • 46
Product Specifications • 103
Page 154 of 154
M
N
P
MVI69E-MBS ♦ CompactLogix Platform
Modbus Serial Enhanced Communication Module
R
Read and Write Block Transfer Sequences • 66
Read Block
Response from the Module to the Processor • 65
Read Coil Status (Function Code 01) • 106
Read Holding Registers (Function Code 03) • 109
Read Input Registers (Function Code 04) • 110
Read Input Status (Function Code 02) • 107
Reference • 103
Renaming PCB Objects • 44
Reset Status Block (9997) • 144
RS-232
Modem Connection (Hardware Handshaking
Required) • 147
Null Modem Connection (Hardware Handshaking)
• 147
Null Modem Connection (No Hardware
Handshaking) • 148
RS-232 Wiring • 146
RS-422 Wiring • 149
RS-485 and RS-422 Tip • 149
RS-485 Wiring • 149
S
Set Port and Command Active Bits Block (9500) • 135
Setting Jumpers • 12
Setting Up a Temporary IP Address • 90
Setting Up the Project in PCB • 25
Slave Mode • 48, 70
Slave Polling Disable Blocks • 126
Slave Polling Enable Blocks (3001, 3101) • 126
Slave Polling Status Blocks (3002 to 3006, 3102 to
3106) • 127
Standard MODBUS Protocol Exception Code Errors •
100
Start Here • 9
Sub-function Codes Supported • 113
Support, Service & Warranty • 151
System Requirements • 10, 37
T
Troubleshooting • 89
U
Uploading the Configuration File from the Processor •
59
User-Defined Data Types (UDTs) • 77
Using an Add-On Profile • 19
Using Controller Tags • 75
Using the Diagnostics Menu in PCB • 93
W
Warranty Information • 152
Write Block
Request from the Processor to the Module • 65
ProSoft Technology, Inc.
June 28, 2017