NOTE
Connecting the
Terminal Power
Pack
CAUTION
4
Insert the SIM into the cardholder.
There is only one SIM slot, but there are multiple SAM slots. Make sure you insert
the SIM card into the SIM slot, as shown in
Figure 14
Inserting SIM Card
5
Install the battery (see
When you have finished connecting optional peripheral(s), you are ready to
x
connect the V
670 terminal to the provided power source.
Using an incorrectly rated power supply may damage the terminal or cause it not
to work as specified. Before troubleshooting, ensure that the power supply being
used to power the terminal matches the requirements specified on the bottom of
the terminal. (See
Chapter
specifications.) Obtain the appropriately rated power supply before continuing
with troubleshooting.
x
The V
670 unit comes with a universal input power pack capable of operating
from voltages of 100VAC to 240VAC.
Figure
Figure
16).
3, Specifications, for detailed power supply
T
ERMINAL
Connecting the Terminal Power Pack
14.
V
670 I
X
NSTALLATION
S
ETUP
25
G
UIDE