Table of Contents
Advertisement
Display
0.0
Set t
Cur out
rAtE
PuL test
no
AL test
no
5-2
Default Configuration
The HIT-2A is configured by the factory before shipment. When the
instrument is purchased with a Hoffer Flowmeter or when calibration
and configuration data are supplied, the instrument is configured as
specified.
When the instrument is shipped without specific
configuration information, the instrument is configured with default
values. Refer to Appendix A for a listing of the HIT-2A factory default
configuration.
5-3
Remote Configuration
The HIT-2A may be configured remotely via the RS232
communications
communications details.
Menu item
Option
Set Total
rAtE
Current Out
4
12
20
Pulse Output Test
Yes
No
Alarm Output Test
Yes
No
interface.
Refer
Configuration
Description
Sets Total to user defined value.
Sets analog output to follow rate or
predefined level.
Outputs a test frequency of 1Hz,
50% duty cycle.
Activates alarm output.
to
Appendix
22
B
for
the
HP-306
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the HIT-2A and is the answer not in the manual?
Questions and answers