Default Configuration - Hoffer Flow Controls HIT-4U User Manual

Flow-Tech, Inc. | In MD 410-666-3200 - In VA 804-752-3450 | www.flowtechonline.com
30 Configuration
ALARM
TOTSET
LO SET
HI SET
4.2

Default Configuration

HIT-4U is fully configured by the factory prior to shipment. When the
instrument is purchased with a Hoffer Flowmeter or when calibration
and configuration data are supplied, the instrument is configured as
specified. When calibration or configuration data is not available, the
instrument is shipped with default values. Refer to the above table for
a listing of the HIT-4U factory default configuration.
HP-327
Alarm function.
Total alarm set
point.
Rate alarm low
set point.
Rate alarm high
set point.
OFF
RATE LO
RATE HI
RATE LOHI
TOTAL
TEST
Numeric
Entry 9999999
Numeric
Entry
Numeric
Entry
N/A OFF
0.001 1000.00
0 10.00
999999
0 100.00
999999
HIT-4U