Omron V680-HAM42-DRT User Manual page 57

BIT SET
Master Unit to DeviceNet Remote ID Controller
Signal Bit length
CMD0 to 4 0010B
CMD3
LEN0 to LEN7 8 1 to 4
ADDR0 to 16 0000H to FFFFH
ADDR15
OD 32 ---
DeviceNet Remote ID Controller to Master Unit
Signal Bit length
NORM 1 0 or 1
ERR 1 0 or 1
XXX_ERR 10 0 or 1
ID 32 ---
Value
BIT SET
Number of BIT SET data bytes
An error will occur if 0, or 5 or higher is specified.
BIT SET start address
BIT SET data
Valid to the number of BIT SET data bytes.
Value
Set to 1 when operation is ended normally.
Set to 1 if the command ends in an error.
The bit corresponding to error completion will be 1, and the error
details will be displayed.
Write data
I/O Settings and Control Methods
Description
Description
RFID System
Section 5
55
User's Manual