Installing Antennas - Omron V680-HAM42-DRT User Manual

Installing Antennas

V680-HS51
Install the Antenna using the nuts and toothed washers that are provided on both sides of the mounting
material, as shown in the diagram below.
Securely tighten the screws to a maximum torque of 6 N·m.
V680-HS52
Install the Antenna using the nuts and toothed washers that are provided on both sides of the mounting
material, as shown in the diagram below.
When the Antenna is mounted to a metal object, the communications distance will be reduced by approximately 10%
compared with mounting to a non-metallic object. For details on the effect of metal surrounding the Antenna, refer to
Effect of Surrounding Metals on the Antenna (Reference).
102
Securely tighten the screws to a maximum torque of 40 N·m.
+0.5
12 dia.
Toothed washers
0
+0.5
22 dia.
0
Toothed washers
Installation, Connections, and Wiring
Metallic material
Nut
Antenna
Non-metallic material
Nut
Antenna
Section 4
RFID System
41
User's Manual