Omron V680-HAM42-DRT User Manual page 45

V680-HS65
100
90 ±0.2
Securely tighten screws to a torque of 0.7 to 1.2 N·m.
Mounting Bracket Dimensions (Provided Only with the V680-HS65)
100 ±0.2
90 ±0.1
Use M4 screws and spring washers (in four places) for
Antenna installation.
Four, M4
Tighten the screws to a torque of 0.7 to 1.2 N·m.
There are no restrictions on the mounting direction or
the direction of access to the Tag, but if the Antenna is to
be installed near a device such as a conveyance belt,
make sure there is no danger of the Antenna being
100
90 ±0.2
accidentally struck.
Note: When installing the Antenna, mount it on the
enclosed Mounting Bracket. The Mounting Bracket
Four, C1
is not necessary, however, if the Antenna is
mounted on a metal base that is larger than the
Antenna (100 × 100 mm).
100 ±0.2
90 ±0.1
V680-HS65
+0.3
Four, 4.5 dia.
0
Installation, Connections, and Wiring
Mounting base
Mounting Bracket
(provided)
Section 4
RFID System
43
User's Manual