Ipv6 Lan Settings; Configure The Radvd Address Type - TP-Link TX-W6961N User Manual

N300 wireless gpon router
Hide thumbs Also See for TX-W6961N:
Table of Contents

Advertisement

Chapter 10
permanent IP addresses, please configure Address Reservation on the router for the
purpose.
Follow the steps below to reserve an IP address for your device.
1
Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2
Go to
Advanced
3
Scroll down to locate the
reservation entry for your device.
4
Enter the
MAC address
5
Specify the IP address which will be reserved by the router.
6
Check to
Enable this entry
10 2

IPv6 LAN Settings

Based on the IPv6 protocol, the router provides two ways to assign IPv6 LAN addresses:
• Configure the RADVD (Router Advertisement Daemon) address type
• Configure the DHCPv6 Server address type
10 2 1

Configure the RADVD Address Type

1
Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2
Go to
Advanced
3
Select
IPv6
to configure IPv6 LAN parameters.
>
Network
>
LAN Settings
Address Reservation
of the device for which you want to reserve IP address.
and click
OK
>
Network
>
LAN
Settings.
page and select IPv4.
table and click
to make the settings effective.
Add
to add an address
41

Advertisement

Table of Contents
loading

Table of Contents