Table of Contents
Advertisement
Chapter 4
2
Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
3
Go to
Advanced
4
Select your WAN Interface Name
(Edit) icon.
5
Scroll down the page, enable IPv6, and configure the IPv6 parameters.
Addressing Type:
SLAAC is the most commonly used addressing type.
IPv6 Gateway:
Note: If your ISP has provided the IPv6 address, click
IPv6 specified by ISP and enter the parameters provided by your ISP.
6
Click
OK
to make the settings effective. Now IPv6 service is available for your
network.
>
Network
>
Internet
(Status
Consult your ISP for the addressing type, DHCPv6 or SLAAC.
Keep the default setting as
page.
should be Connected) and click the
Current
Connection.
Advanced
to reveal more settings. Check to use
14
Advertisement
Table of Contents
