Chapter 4
Configure the Router in Wireless Router Mode
4. Enter the
MAC address
of the device for which you want to reserve IP address.
5. Specify the IP address which will be reserved by the router.
6. Check to
Enable this entry
and click
Save
to make the settings effective.
4 3 3
IPv6 LAN Settings
Based on the IPv6 protocol, the router provides two ways to assign IPv6 LAN addresses:
• Configure the RADVD (Router Advertisement Daemon) address type
• Configure the DHCPv6 Server address type
4 3 3 1 Configure the RADVD address type
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
Advanced
>
Network
>
LAN Settings
page.
3. Select
IPv6
to configure IPv6 LAN parameters.
21