Table of Contents
Advertisement
5
If you still cannot access the Internet, please restore your router to its factory
default settings and reconfigure your router by following the instructions in
Quick Setup
Wizard.
6
Please contact your ISP if the problem still exists.
T5 How to configure MAC Clone?
You can manually change the MAC address of the router. It is helpful when your Internet
access account provided by your ISP is bound to one specific MAC address, in other
words, your ISP just permits only one computer with the authenticated MAC address
to access the Internet. In this case, you can use MAC Clone to allow more computers to
access the Internet via the same account.
1
Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2
Go to
Advanced
get the
MAC Clone
•
If you are using the computer with the authenticated MAC address to access
the router, please select
•
If you know the authenticated MAC address, please select
Address
and then enter the address.
3
Click
OK
to make the settings effective.
T6 How to use the WDS Bridging function to extend my wireless
network?
My house covers a large area. The wireless network coverage of the router I'm using
(the root router) is limited. I want to use an extended router to extend the wireless
network of the primary router. Follow the steps to configure the router.
1
Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2
Configure the
LAN IP address
For example, if the IP address of the root router is 192.168.0.1, the IP address of the
extended router should be from 192.168.0.2 to 192.168.0.254.).
>
Network
>
Internet
section.
Use Current Computer MAC
of the router in the same subnet as the root router.
page. Click the
Add
Address.
icon, and scroll down to
Use Custom MAC
Use
72
Advertisement
Table of Contents
