Chapter 13
1. Visit http://tplinkwifi.net, and log in with the password you set for the controller.
2. Go to
Advanced
3. Scroll down to locate the
address reservation entry for your device.
4. Enter the
MAC Address
5. Specify the IP address which will be reserved by the controller.
6. Keep the
Enable This Entry
effective.
13. 2. Configure IPv6 LAN Settings
Based on the IPv6 protocol, the controller provides two ways to assign IPv6 LAN
addresses:
• Configure the RADVD (Router Advertisement Daemon) address type
• Configure the DHCPv6 Server address type
13. 2. 1. Configure the RADVD Address Type
1. Visit http://tplinkwifi.net, and log in with the password you set for the controller.
2. Go to
Advanced
3. Select
IPv6
to configure IPv6 LAN parameters.
>
Network
>
LAN Settings
Address Reservation
of the device for which you want to reserve IP address.
check box selected and click
>
Network
>
LAN
Settings.
Customize Your Network Settings
page and select IPv4.
section and click
OK
to make the settings
Add
to add an
58