Ipv6 Lan Settings; Configure The Radvd Address Type - TP-Link TD-W9970 User Manual

Chapter 13
permanent IP addresses, please configure Address Reservation on the router for the
purpose.
Follow the steps below to reserve an IP address for your device.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced
3. Scroll down to locate the
reservation entry for your device.
4. Click Scan and select the device for which you want to reservce IP address. Then
the MAC Address
MAC Address and
5. Check to Enable this entry

13. 3. IPv6 LAN Settings

Based on the IPv6 protocol, the modem router provides two ways to assign IPv6 LAN
addresses:
• Configure the RADVD (Router Advertisement Daemon) address type
• Configure the DHCPv6 Server address type

13. 3. 1. Configure the RADVD Address Type

1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced
> Network > LAN Settings
Address Reservation
and IP Address will be automatically filled in. Or, you can enter the
IP Address.
and click Save
> Network > LAN Settings.
Specify Your Network Settings
page and select IPv4.
table and click Add
to make the settings effective.
to add an address
68