Changing Lanesense Status - Dodge Charger SRT 3922016 Owner's Manual

210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Lane Approached (Flashing Yellow Thick Line, Solid
Yellow Thin Line/Flashing Yellow Indicator)
NOTE: The LaneSense system operates with the similar
behavior for a right lane departure.

Changing LaneSense Status

The LaneSense system settings can be configured
through the Uconnect system screen.
Follow these steps to change the LaneSense settings:
1. Press the "Controls" button on touchscreen located on
the bottom of the Uconnect display.
2. Press the "Settings" button.
3. Press the "Safety & Driving Assistance" button.
When in the Safety & Driving Assistance screen, you can
configure the intensity of the torque warning and the
warning zone sensitivity (early/late) through the person-
alization settings.
NOTE:
• When enabled the system operates above 37 mph
(60 km/h) and below 112 mph (180 km/h).
• Use of the turn signal suppresses the warnings.
I n f o r ma t i o n P r o v i d e d b y :