Dodge Charger SRT 3922016 Owner's Manual page 316

314 UNDERSTANDING YOUR INSTRUMENT PANEL
For further information, refer to "Lane Departure Warn-
ing (LDW)" in "Understanding The Features Of Your
Vehicle".
• ParkSense — If Equipped
The ParkSense system will scan for objects behind the
vehicle when the transmission shift lever is in REVERSE
and the vehicle speed is less than 11 mph (18 km/h). It
will provide an alert (audible and/or visual) to indicate
the proximity to other objects. The system can be enabled
with Sound Only, or Sound and Display. To change the
ParkSense status, press and release the "Sound Only" or
"Sound and Display" button. Refer to "ParkSense" in
"Understanding The Features Of Your Vehicle" for sys-
tem function and operating information.
• Rear ParkSense Volume
The Rear ParkSense Chime Volume settings can be se-
lected from the DID or Uconnect System. The chime
volume settings include LOW, MEDIUM, and HIGH. The
factory default volume setting is MEDIUM. To make
your selection, press the "Rear ParkSense Vol." button on
the touchscreen, until a check-mark appears next to
setting, indicating that the setting had been selected.
ParkSense will retain its last known configuration state
through ignition cycles.
• Tilt Side Mirrors In Reverse
When this feature is selected, the exterior sideview
mirrors will tilt downward when the ignition is in the
RUN position and the transmission shift lever is in the
REVERSE position. The mirrors will move back to their
previous position when the transmission is shifted out of
REVERSE. To make your selection, press the "Tilt Side
Mirrors in Reverse" button on the touchscreen, until a
check-mark appears next to setting, indicating that the
setting had been selected.
I n f o r ma t i o n P r o v i d e d b y :