Changing Lanesense Status - Dodge CHARGER 2020 Owner's Manual

196 STARTING AND OPERATING
Left Lane Departure — Both Lanes Detected
When the LaneSense system is on, the lane

lines turn from gray to white to indicate that
both of the lane markings have been
detected. The LaneSense telltale is solid
green when both lane markings have been
detected and the system is "armed" to
provide visual warnings in the instrument
cluster display and a torque warning in the
steering wheel if an unintentional lane depar-
ture occurs.
Lanes Sensed (White Lines/Green Telltale)
When the LaneSense system senses a lane

drift situation, the left thick lane line and left
thin line turn solid yellow. The LaneSense tell-
tale changes from solid green to solid yellow.
At this time torque is applied to the steering
wheel in the opposite direction of the lane
boundary.
For example, if approaching the left side of
the lane the steering wheel will turn to the
right.
Lane Sensed (Solid Yellow Lines/Solid Yellow Telltale)
When the LaneSense system senses the lane

has been approached and is in a lane depar-
ture situation, the left thick lane line flashes
yellow (on/off) and the left thin line remains
solid yellow. The LaneSense telltale changes
from solid yellow to flashing yellow. At this
time torque is applied to the steering wheel in
the opposite direction of the lane boundary.
For example, if approaching the left side of
the lane the steering wheel will turn to the
right.
Lane Approached (Flashing Yellow Thick Line, Solid
Yellow Thin Line/Flashing Yellow Telltale)
NOTE:
The LaneSense system operates with similar
behavior for a right lane departure.

Changing LaneSense Status

The LaneSense system settings can be
configured through the Uconnect system
screen.
Follow these steps to change the LaneSense
settings:
1. Press the "Controls" button located on the
bottom of the Uconnect touchscreen
display.
2. Press the "Settings" button.