TP-Link TL-WA701ND Setup
  1. Manuals
  2. Brands
  3. TP-Link Manuals
  4. Wireless Router
  5. TL-WA701ND
  6. Setup

TP-Link TL-WA701ND Setup

Access point setup
Hide thumbs Also See for TL-WA701ND:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

TP-Link Access Point Setup
Contents
1 Overview
2 Configuration instructions
3 Troubleshooting
Page 1 of
8
TP-Link TL-WA701ND
Access Point setup
July 1, 2016
2
2
8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TL-WA701ND and is the answer not in the manual?

Questions and answers

Related Manuals for TP-Link TL-WA701ND

Summary of Contents for TP-Link TL-WA701ND

  • Page 1 TP-Link Access Point Setup TP-Link TL-WA701ND Access Point setup July 1, 2016 Contents 1 Overview 2 Configuration instructions 3 Troubleshooting Page 1 of...
  • Page 2 The TP-Link TL-WA701ND is a multi-function access point. This document is intended to assist with con- figuring the TL-WA701ND to allow the EG3000 to communicate on an existing WiFi network. This guide is designed only for use with a TP-WA701ND purchased through eGauge Systems.
  • Page 3 TP-Link Access Point Setup 4. The Quick Setup wizard will load in the browser. Click Next to start the configuration process. 5. Select Client from the list of operating modes. Click Next. Page 3 of...
  • Page 4 TP-Link Access Point Setup 6. Click Survey to scan for a list of available wireless access points. Alternatively, skip to step manually enter information. 7. From the list of available WiFi networks, select the network to use by clicking Connect to the far right.
  • Page 5 TP-Link Access Point Setup 8. Once the Connect option is clicked, these fields will automatically fill in. Alternatively, enter the Wireless Name (SSID) and Wireless Security Mode and Wireless Password. The wireless security settings will need to be manually entered for any password protected WiFi network. Click Next.
  • Page 6 TP-Link Access Point Setup 9. The default values are typically fine for these settings. If needed, obtain the correct settings from the network administrator. Be sure to make a note/take a screenshot of the IP address set in this step, as it will replace the original fallback IP address.
  • Page 7 10. Make a note or take a screenshot of the applied settings if desired, then click Save. 11. The device will reboot. The configuration page will likely not load; try loading a web-page (e.g., http://www.egauge.net) while the TP-Link Access Point is connected to the computer to see if there is Internet connectivity.
  • Page 8 I cannot access the device at all (lost credentials, major configuration issue, etc) The TP-Link TL-WA701ND has a recessed reset button located on the back of the device. This button is closest to the antenna, and a pin or paperclip is needed to press it. Hold the button down for 8+ seconds.

Table of Contents