Wireless Security - TP-Link TL-WA701ND User Manual

Note:
Limited by local law regulations, version for North America does not have region selection
option.
Channel - This field determines which operating frequency will be used. It is not necessary
to change the wireless channel unless you notice problems with another nearby access
point.
Mode - This field determines the wireless mode which the device works on.
•
11b only - Only 802.11b wireless stations can connect to the device.
•
11g only - Only 802.11g wireless stations can connect to the device.
•
11n only - Only 802.11n wireless stations can connect to the device.
•
11bg mixed - Both 802.11b and 802.11g wireless stations can connect to the device.
•
11bgn mixed - All 802.11b, 802.11g and 802.11n wireless stations can connect to the
device.
Channel Width - Select the channel width from the pull-down list .
Max Tx Rate - You can limit the maximum tx rate of the device through this field.
MAC of AP (1-4) - Enter the MAC address of other AP(s).
Enable Wireless Radio - The wireless radio of this device can be enabled or disabled to
allow or deny wireless stations to access.
Enable SSID Broadcast - When wireless clients survey the local area for wireless networks
to associate with, they will detect the SSID broadcast by the AP. If you select the Enable
SSID Broadcast checkbox, the AP will broadcast its name (SSID) on the air.
Click the Search button to detect the SSIDs in the local area.
Note:
To apply any settings you have altered on the page, please click the Save button, and then you
will be reminded to reboot the device.

3.5.2 Wireless Security

The security options are different for different operation mode.
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide
Note Dialog
29