System Tools - TP-Link TL-WA701ND User Manual

MAC Address - The MAC Address of the PC which you want to reserve an IP address for.
Reserved IP Address - The IP address that the device reserved.
Status - It shows whether the entry is enabled or not
Modify - To modify or delete an existing entry.
To Reserve IP addresses:
1. Click the Add New... button to add a new Address Reservation entry.
2. Enter the MAC address (The format for the MAC Address is XX-XX-XX-XX-XX-XX.) and IP
address in dotted-decimal notation of the computer you wish to add.
3. Click the Save button when finished.
To modify A Reserved IP address:
1. Select the reserved address entry as you desire, and modify it. If you wish to delete the entry,
make all of the entry fields blank.
2. Click the Save button.
To delete all Reserved IP addresses:
Click the Clear All button.
Click the Save button
Click the Next button to go to the next page and Click the Previous button to return the previous
page.
Note:
The changes won't take effect until the device reboots.

3.7 System Tools

Figure 3-29 The System Tools menu
There are nine submenus under the System Tools menu (shown in Figure 3-29): SNMP,
Diagnostic, Firmware Upgrade, Factory Defaults, Backup & Restore, Ping Watch Dog,
Reboot, Password, and System Log. Click any of them, and you will be able to configure the
corresponding function. The detailed explanations for each submenu are provided below.
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide
49