Icmp Source Input Ports; Icmp Displayport Specifications - Barco Athena User Manual

USB
Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the cables, connectors and
communications protocols used in a bus for connection, communication, and power supply between computers and
electronic devices. USB 2.0 (also called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective
throughput up to 35 MB/s or 280 Mbit/s), in addition to the "USB 1.x Full Speed" signaling rate of 12 Mbit/s.[16] USB 2.0
connectors are usually colored black. USB 3.0 defines a new SuperSpeed mode with a signaling speed of 5 Gbit/s and
a usable data rate of up to 4 Gbit/s (500 MB/s). A USB 3.0 port is usually colored blue, and is backwards compatible
with USB 2.0.
5.4

ICMP source input ports

Location of the source input ports
Image 5-7
Functionality
DisplayPort A (B)
8
DisplayPort connector to connect a video source.
3G-SDI A (B)
9
SDI connector to connect a video source.
HDMI
10
HDMI connector to connect a video source.
5.5 ICMP DisplayPort specifications
DisplayPort
Digital display interface developed by the Video Electronics Standards Association (VESA). This royalty-free interface
is primarily used to connect a video source to a display device such as a computer monitor, though it can also be used
to transmit audio, USB, and other forms of data. VESA designed it to replace VGA, DVI, and FPD-Link. Backward
compatibility to VGA and DVI by using active adapter dongles enables users to use DisplayPort fitted video sources
without replacing existing display devices.
R5906789 ATHENA 16/12/2016
9 8 10
5. ICMP
35