Table of Contents
Advertisement
ICMP(-X)
GPI 1-4 (5-8)
These RJ45 connectors can be used to receive trigger signals from other devices. The mapping of the
General Purpose Input (GPI) on each input Cues is configured via the Communicator software. Please
refer to the Communicator user guide for further information.
SYNC IN / OUT
Synchronization signal IN and OUT: Reserved for multiple-projector projection. Use a 50 Ohm coaxial
cable to connect the sync signal from projector to projector.
LAN 1 (2)
The ICMP(-X) can be connected to a LAN (local area network) using one of the Ethernet ports. These
LAN port are used for 'content' transfer.
NOTE: These ports are optionally used to connect to external content storage sources. Control of the
ICMP(-X) is done via the same IP address as the projector.
USB 2.0
The ICMP(-X) can be connected to a USB 2.0 Media to load content. The USB port can be used to load
content (DCP) or keys (KDM).
NOTE: It is recommended to use the USB 3.0 ports for faster ingest.
USB 3.0
The ICMP(-X) can be connected to a USB 3.0 Media to load content. The USB port can be used to load
content (DCP), or keys (KDM), or software update.
NOTE: These ports are recommended for fast ingest when connected to an appropriate USB 3.0 source.
USB
Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the
cables, connectors and communications protocols used in a bus for connection, communication,
and power supply between computers and electronic devices. USB 2.0 (also called "Hi-Speed"),
adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280
Mbit/s), in addition to the "USB 1.x Full Speed" signaling rate of 12 Mbit/s.[16] USB 2.0 connectors
are usually colored black. USB 3.0 defines a new SuperSpeed mode with a signaling speed of 5
Gbit/s and a usable data rate of up to 4 Gbit/s (500 MB/s). A USB 3.0 port is usually colored blue,
and is backwards compatible with USB 2.0.
8.12 ICMP(-X) source input ports
Location of the source input ports
ICMP and ICMP-X equipped with two HDMI 2.0 (Reference 8, Image 8-20) as video source.
76
R5906790 /04
Athena
Advertisement
Table of Contents
