Cleaning; Maintenance Intervals; Maintenance Interval Table - FLORABEST FKS 2200 F3 Translation Of The Original Instructions

Cleaning

• Clean the machine thoroughly after
every use. In this way, you extend the
life of the machine and avoid acci-
dents.
• Keep the gripping handles free of pet-
rol, oil or grease. Clean the gripping
handles, where appropriate, with a
moist cloth soaked in soap. Use no sol-
vents or petrol for cleaning!
• Clean the saw chain after every use.
Use a paint brush or wipe for that. Do
not use any liquids to clean the chain.
After cleaning, oil the chain lightly with
chain oil.
• When cleaning, also remove the chain
wheel cover (15) so that this area can
be cleaned as well.

Maintenance Interval Table

Machine part
Components of the chain brake
Sprocket chain wheel (25)
Saw chain (5)
Saw chain (5)
Guide bar (4)
Guide bar (4)
Oil automatic system
• Clean the chain bar (Guide) (4).
• Clean the ventilation slots and the
surfaces of the machine with a paint
brush, whisk or dry cloth. Do not use
any liquids for cleaning.
• Clean the oil passages of the chain
bar (27), in order to guarantee a trou-
ble-free, automatic oiling of the saw
chain during operation.

Maintenance intervals

Regularly carry out the maintenance opera-
tions listed in the following table. The life
of the saw is extended by regular main-
tenance of your chainsaw. Furthermore,
you get optimum cutting performance and
avoid accidents.
Action
Check, replace if re-
quired
Check, replace if re-
quired
Check oil, regrind or
replace if required
Clean and oil
Check, clean and oil
turn around
check and, where
appropriate, clean oil
outflow duct
Before After 10
every hours
use of operation






G B
After
every
use


2 1