Table of Contents
Advertisement
3.3 Installation with IP sharing device(router)
3.3.1 General Installation
(1) Connect the camera and PC with LAN cable(cross cable).
(2) After checking video in '2. Installation and video check', then go to the next step.
(3) Go to network setting page of Administrator's Page as per 3), 4), 5) of '3.2.1 Static IP Setup'
(4) DNS Server Setting
For setting of 'DNS server', input DNS address to fit with network environment to set.
(Default address is DNS address of 'KT Telecom')
Use DNS value normally set in PC. Click
(5) IP Address Setting
Click 'Static IP Address' in 'IP Setting' of [Pic. 3-10], and input IP Address, Subnet Mask, Default
Gateway(Please refer to the manual of IP sharing device) and click button to save the setting value.
Click
button to save the setting value.
[Pic. 3-10] Network Setting
button to save the setting value.
32
Advertisement
Table of Contents
