Grizzly G0808 Owner's Manual page 7

X/Y Cross Table
R
Q
V
Figure 3. Table controls and components.
Q. X-Axis Power Feed: Moves table along
X-axis (left and right) when turned ON (see
Page 6 for more information).
R. Table: Equipped with four
mounting workpiece. Adjusts in X-(left to
right), Y-(front to back), and Z-(up and down)
axes.
S. X-Axis Table Locks: Tighten to prevent
X-axis table movement for increased rigidity
during operations where the X-axis should
not move.
T. X-Axis Handwheel: Manually moves table
along X-axis (left and right).
U. Y-Axis Handwheel: Manually moves table
along Y-axis (front and back).
V. Z-Axis Table Lock: Tighten to secure table
height setting.
Model G0808 (Mfd. Since 11/15)
S T
U
⁄ " T-slots for
1
2
W
Figure 4. Z-axis table controls and components.
W. Y-Axis Table Locks: Tighten to prevent
Y-axis table movement.
X. Z-Axis Power Feed: Moves table along
Z-axis (up and down) when turned ON (see
Page 6 for more information).
Y. Z-Axis Crank Handle: Manually moves table
along Z-axis (up and down).
Figure 5. Master Power Switch in OFF position.
Z. Master Power Switch: Toggles incoming
power ON or OFF. Vertical position toggles
incoming power ON. Horizontal position, (see
Figure 5) toggles incoming power OFF.
Note: Can be locked in OFF position with a
padlock to prevent unauthorized usage.
X
Y
Z
-5-