Section 5: Accessories - Grizzly G0808 Owner's Manual

ACCESSORIES

SECTION 5: ACCESSORIES

Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
G8867—Cobalt Alloy Drill Bits
These cobalt alloy bits are resistant to heat and
stress, allowing them to turn faster without over-
heating. The 135° split point enables the drill to
use less thrust and eliminates the tendency of the
drill point to walk, which makes these great for use
in portable drills or drill presses. Cobalt Alloy bits
retain their edge sharpness longer than normal
HSS bits, resulting in a significant saving of time
and money in the workshop.
Figure 51. Model G8867 Cobalt Alloy Drill Bits
⁄ "– ⁄
1 1
16
order online at
Model G0808 (Mfd. Since 11/15)
⁄ "– ⁄ ", 29-Pc.
1 1
16 2
", 29-Pc.
2
www.grizzly.com
G3658—Tin-Coated 115-Pc. Drill Bit Set
Titanium nitride-coated bits last up to six times
as long as uncoated bits. This 115-piece set fea-
tures 29 fractional bits, from
of ⁄ ", letter bits from A–Z, and 60 number bits.
1
64
Housed in a rugged steel case.
Figure 52. Model G3658 115-Pc. Drill Bit Set.
H8263— ⁄ " x R-8 Keyless Chuck with Integral
1
2
Shank
These precision, keyless drill chucks have integral
shanks to fit a variety of spindles including Morse
taper, R-8 and Cat 40. Each chuck has a knurled
grip for plenty of torque and if that's not enough,
they are spanner wrench compatible. (Spanner
wrench not included.) Made in an ISO 9001 certi-
fied factory.
Figure 53. Model H8263 Precision Keyless Drill
Chuck.
1-800-523-4777
or call
⁄ "– ⁄ " in increments
1 1
6 2
-35-