12. Orient the Seat (15) as shown.
Attach the Seat (15) to the Seat Frame (10) with
four M8 x 20mm Screws (47); start all of the
Screws, and then tighten them.
13. Attach the Backrest (16) to the Backrest Frames
(8) with four M8 x 40mm Screws (46) and four
M8 Washers (40); start all of the Screws, and
then tighten them.
14. Orient the Bushing (19) as shown.
Firmly press the Bushing (19) onto the upper
end of the Post Frame (4).
Next, remove the Adjustment Knob (22) from the
Post Frame (4), insert the Leg Lever Post (5) into
the Post Frame, and then tighten the Adjustment
Knob into the Post Frame and into one of the
adjustment holes in the Leg Lever Post. Make
sure that the Adjustment Knob is in one of
the adjustment holes.
12
15
10
47
13
46
14
5
Tabs
19
4
22
10
47
16
8
40
46
40