Table of Contents
Advertisement
Light Palette Lighting Control Console
If a Static IP address is required, then follow the steps below to setup a network connection.
To manually setup a network connection:
Step 1. At Control Panel, click "Advanced Network" icon.
Step 2. Select "Local Area Connection" and then click "Change settings of this connection."
Note: Default gateway and DNS server will not need to be set for all local networking solutions.
Step 3. At Local Area Connection Properties, select "Internet Protocol Version 4 (TCP/Pv4)" and click
"Properties."
a. Choose "Use the following IP address" (typically 192.168.0.68).
b. Type in the static IP address and appropriate Subnet mask provided by the network administrator.
c. Type in a Default gateway if access to an outside of the LAN connection (i.e. connect to other networks
or Internet) is required.
d. Type in a Preferred DNS (Domain Name Server) for computer and website lookups.
e. Click "OK."
f. Click "OK" in the "Local Area Connection Properties" dialogue box.
g. Close the "Network Connections" window.
Note: There is no need to reboot the processor for network changes to take affect.
Installation & Setup Guide
45
Software Configuration
Advertisement
Table of Contents
