Table of Contents
Advertisement
Light Palette Lighting Control Console
25. Shift
SHIFT
• Use with [REL-PB] to release all Cue Lists.
• Use with [STEP FORWARD/BACKWARD] buttons to go to the top or bottom of a Cue List.
• Use with [ARROW KEYS] to select a range of cells with the blue box.
• Use with [GO] to assert the appropriate Cue List.
• Use with [BACK] to run the previous cue in cue time.
• Use with [UP] or [DOWN] to adjust the selected channel's level by one percent.
• Use with Split Crossfaders or Single Crossfaders (A/B C/D fader setup under [S3] Hardware Setup) to manually
move backwards through a Cue List.
• When the command line is empty, holding down [SHIFT] and rolling the level wheel will scroll the channel grid.
• Use with [MOVE] to open the Move dialogue box.
• Use with [COPY] to open the Copy dialogue box.
• Use with [REC] to open the Record dialogue box.
• Use with [UNDO] or [REL] to restore previously released channels. If all three stages of release were used, this
will return them in three stages, in order.
• Use with [REL-PB] to release all Cue Lists.
• Use with [STEP FORWARD/BACKWARD] buttons to go to the top or bottom of a Cue List.
• Use with [ARROW KEYS] to select a range of cells with the blue box.
• Use with [GO] to assert the appropriate Cue List.
• Use with [BACK] to run the previous cue in cue time.
• Use with [UP] or [DOWN] to adjust the selected channel's level by one percent.
• When the command line is empty, holding down [SHIFT] and rolling the level wheel will scroll the channel grid.
Installation & Setup Guide
35
Button Details
Advertisement
Table of Contents
