Technical Description; Advantages; Attaching The Bicycle Handle With Rotating Handlebar Support; Very Good Acceleration - Stihl FS 460 C Technical Information

Technical Information 40.2010
2.2.6

Advantages

Easy starting
With M-Tronic there is only one start position on the
choke lever because the system detects cold or
warm starts and electronically computes the exact
fuel flow. Starting with a few pulls of the starter rope
and immediate full throttle.
Permanent optimum engine performance
By means of the engine temperature and speed, the
control unit continually checks the operating state of
the clearing saw and adjusts the fuel flow for
constant optimum engine performance.

Very good acceleration

The FS 460 C accelerates spontaneously and
quickly by virtue of electronic ignition timing control
and fuel flow adjustment.
No manual carburetor adjustments
M-Tronic electronically adjusts the fuel-air mixture in
the carburetor: for all operating states such as start,
idle, part throttle and full throttle as well as taking
into account the external conditions, e. g., use at
varying altitudes, changing temperatures or fuel
quality (caloric value – energy content of the fuel,
alcohol content, knock resistance).
Memory function (electronic memory)
M-Tronic remembers, for an unlimited period of
time, the settings from the last time the clearing saw
was used and retrieves them the next time the
clearing saw is started. Thus full engine power is
available immediately each time the machine is
started under the same external conditions.
TI_40_2010_13_01_02.fm
3.

Technical description

3.1 Attaching the bicycle handle with
rotating handlebar support
The clamps are already attached to the handlebar at
the factory.
. Attaching the control handle
To assemble the rotating handlebar support, the
clamps must be fitted with a spring and fastened to
the handlebar support on the machine.
. Remove spring (1) from the set of parts included
with the machine
. Fit spring (1) in the lower clamp (2)
. Carry out further assembly in accordance with
Instruction Manual
Page 5
1
2