Operating Elements; Stop Switch Function; Choke Lever - Stihl FS 460 C Technical Information

Page 6
3.2

Operating elements

2
1 Throttle trigger lockout
2 Throttle trigger
3 Stop switch – with the positions for Run and
Stop. To switch off the engine, the stop switch
(STOP) must be pressed.
3.3

Stop switch function

When the stop switch is not actuated, it is in the
position Run: The ignition is switched on – the
engine is ready for starting and can be started. If the
stop switch is actuated, the ignition is switched off.
Once the engine comes to a standstill, the ignition is
automatically switched on again.
3.4
3
To start the engine, the choke lever (1) must be
pressed in at the edge (arrows) and rotated to the
1
position }. Once the engine has been started and
the throttle trigger lockout and throttle trigger have
been pressed, the choke lever automatically returns
to the position Run F . It is not necessary to move the
choke lever to Run F by hand.
After a cold start, let the engine warm up with a few
load cycles.
Technical Information 40.2010

Choke lever

1
TI_40_2010_13_01_02.fm