Page 10
3.7.2
Version with short drive tube, see b 4.4
1
2
1
Limit stop 200 mm for circular saw blades
2
Limit stop 225 mm for circular saw blades
The new limit stops are fastened with 3 screws
secured against loss.
For details about the approved deflectors and limit
stops, see b 5.2.
3.8
4-point anti-vibration system
Four anti-vibration elements for damping vibrations
are installed between the engine and the drive tube,
In addition to rubber buffers and annular buffers as
anti-vibration elements in the area of the engine,
steel springs are used as anti-vibration elements in
the area of the handlebars. The 4-point anti-
vibration system ensures a very low vibration level,
optimal control and reduced operating effort.
Technical Information 40.2010
3.9
New full harnesses
3.9.1
Universal harness ADVANCE
–
Functional, modern shape – outstanding
handling and ergonomics
–
Very low weight: 0.74 kg
–
Available in two sizes
The new universal harness ADVANCE includes an
exhaustive information sheet about putting on the
harness properly and the ways in which it can be
adjusted.
TI_40_2010_13_01_02.fm