Xlr Direct Output; Specifi Cations; Warranty - Radial Engineering BASSBONE OD User Manual

True to the Music
®
THE HEADPHONE AMP
Last but not least, the Bassbone OD is equipped with a headphone
amplifi er for practicing. The 3.5mm headphone jack outputs the same
signal as the ¼" amp output so you can use all of the controls, overdrive,
effects and listen to it all in complete privacy!
3.5mm HEAD- HEADPHONE
PHONE OUT LEVEL
A standard 3.5 mm (1/8") mini TRS connector sends the instrument signal
to both ears. Start by setting the recessed level control fully counter-
clockwise, plug in your ear buds and then slowly increase the level until
you are comfortable. Note: Exposure to high sound pressure levels
over an extended period can lead to hearing loss. You should consult
your local government health authority on acceptable levels to make
sure you are in compliance with local health regulations.
SPECIFICATIONS*
Audio circuit type: ................................................Discrete and integrated, class-A circuits
Frequency response: ...................................20Hz ~ 18kHz (tailored for bass instruments)
Total harmonic distortion: ........................................................................ 0.05% @ -15dBu
Inter-modulation distortion: ....................................................................... 0.2% @ -20dBu
¼" Input impedance (1/4" input-A): ...................220k megΩ (PZB off) 10 megΩ (PZB on)
¼" Input impedance (1/4" input-B with Drag control): ............ Variable, 22kΩ ~ 1.8 megΩ
¼" Output: ......................................................................................High-Z instrument-level
3.5mm output: .............................. Headphone-level, mono with dedicated volume control
XLR output: ................................................. Balanced mic-level, AES standard (pin-2 hot)
Ground lift (XLR direct out): ...................................... Disconnects pin-1 at the XLR output
Power: .......................................................................... +15VDC/400mA adapter included
Construction: ............................................................... 14 gauge steel, powder-coat fi nish
Size: ...............................................................................4.2" x 8" x 2" (107 x 203 x 48mm)
Weight: .......................................................................................................2.55lb (1.13kg)
Shipping Size: ...............................................................5"x2.75"x10.75" (127x70x273mm)
Shipping Weight: ..........................................................................................2.8lb (1.27kg)
Conditions: .......................................For use in dry locations only between 5°C and 40°C
Warranty: ..................................................................................Radial 3-year, transferable
*Specifi cations are subject to change without notice.
14
Radial Engineering Ltd.
Bassbone OD™