Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Radial Engineering PreMax 500 Series
Summary of Contents for Radial Engineering PreMax 500 Series
-
Page 1: User Guide
True to the Music ® PreMax ™ 500 Series Preamp and EQ User Guide True to the Music ® www.radialeng.com Radial Engineering Ltd. 1588 Kebet Way, Port Coquitlam British Columbia, Canada, V3C 5M5 tel: 604-942-1001 • fax: 604-942-1010 email: info@radialeng.com... - Page 2 WARNING NOTICE TO USER! Although preventative safety measures have been designed into Radial 500 series products we strictly advise against hot-swapping modules or plugging and unplugging them when the Workhorse or other 500 series racks are powered on. Hot swapping can cause connection sparks at the card-edge connector that could send damaging transients to other equipment.
-
Page 3: Table Of Contents
If you still have a question, feel free to send us an email at info@radialeng.com and we will do our best to answer in short order. Now get ready to record with ease and confi dence! Radial Engineering Ltd. PreMax™ Preamp and EQ... -
Page 4: Overview
When using the PreMax in a Radial 500 series power rack the Omniport is available and functions as a high-impedance ¼” input for electronic instruments. For more information please refer to the Omniport description later in this user guide. Radial Engineering Ltd. PreMax™ Preamp and EQ... - Page 5 This straight forward equalizer makes it easy to get great sounds up in your monitors quickly. A handy EQ-IN bypass switch lets you compare the sound of the track between the pre and post EQ settings. Radial Engineering Ltd. PreMax™ Preamp and EQ...
-
Page 6: Features
9. OMNIPORT: Rear mounted ¼” connector designated as an instrument input to allow guitar and bass to be recorded direct. Available when used with the Radial Workhorse. Radial Engineering Ltd. PreMax™ Preamp and EQ... -
Page 7: Making Connections
Using your own voice to test is best, as it gives you a familiar starting place. Radial Engineering Ltd. PreMax™ Preamp and EQ... -
Page 8: Getting Started
Live sound engineers will often reduce the low end from acoustic instruments to reduce resonance and prevent run-away feedback. High-pass fi lter response Radial Engineering Ltd. PreMax™ Preamp and EQ... - Page 9 Taking this further, you can employ the high-pass fi lter in the preamp section to cut deep bass. The mid-range is superimposed over the high and low fi lters to show the frequency overlap between bands. Radial Engineering Ltd. PreMax™ Preamp and EQ...
-
Page 10: Ominiport
CARD SLOT 1 INPUT FEED OUTPUT LINK OMNIPORT OUTPUT INPUT Omniport input on Radial 500 series racks. INST (in) The MIC/INST selects between the XLR mic input and the Omniport instrument input. Radial Engineering Ltd. PreMax™ Preamp and EQ... -
Page 11: Band Eq
INST. INPUT OVER DRIVE RED LED METER SIGNAL GREEN LED MIC PRE PHANTOM HIGH MIC / INST. PHASE THREE WITH POWER PASS SWITCH REVERSE BAND EQ ACCUSTATE OUTPUT INPUT FILTER ON/OFF GAIN LINE OUTPUT Radial Engineering Ltd. PreMax™ Preamp and EQ... - Page 12 THREE YEAR TRANSFERABLE LIMITED WARRANTY RADIAL ENGINEERING LTD. (“Radial”) warrants this product to be free from defects in material and workmanship and will remedy any such de- fects free of charge according to the terms of this warranty. Radial will repair or replace (at its option) any defective component(s) of this product (excluding fi...
Need help?
Do you have a question about the PreMax 500 Series and is the answer not in the manual?
Questions and answers