Channel Eq Controls - Radial Engineering BASSBONE OD User Manual

True to the Music
®
USING THE CHANNEL EQ CONTROLS
Now that you have sound, adjust the three-band EQ controls on channel-A.
You will fi nd them to be very powerful! The passive-interactive EQ works a
lot like a vintage guitar amp whereby when you turn the EQ down, you will
reduce the output level signifi cantly. This of course is easily made up by
increasing the sensitivity on your bass amp.
Each channel has two 3-position switches. The MID switch allows you to
choose between three center frequencies. This is used along with the MID
EQ control to shape your sound.
250Hz 500Hz 1kHz
The HPF (high pass fi lter) switch reduces excessive bass to help control
low frequency resonant feedback on a live stage. Choose between FLAT
(no bass cut) and two low frequency cut-off settings. The HPF is particulary
useful when using the Bassbone OD with acoustic instruments and piezo
pickups.
80Hz 150Hz
When one bass is connected in INPUT-A you can toggle between channels
by depressing the A/B footswitch. The channel-B yellow LED will illuminate.
This is where you can use the EQ controls to radically change the tone
from one channel to the other and simulate playing with two completely
different basses.
6
Radial Engineering Ltd. Bassbone OD™