Effects Loop - Radial Engineering BASSBONE OD User Manual

®
USING THE EFFECTS LOOP
When using pedals with the Bassbone OD, they can be positioned in a
number of locations within the signal path depending on what you are
attempting to do. For example, you could have some effects dedicated
to one bass by inserting them between the instrument and the Bassbone
OD input.
PA
SYSTEM
You could also introduce a series of pedals between the Bassbone OD's
¼" output and your amp. This way the pedals can be used with both
instruments and your amp but the effects will not be sent to the PA system.
SYSTEM
To take things one step further, the Bassbone OD is equipped with an
effects loop. When pedals are connected in the loop you can use them
with both instruments and choose to send the pre-effects signal (dry) or
the post-effect signal (wet) to the PA.
PA
SYSTEM
Radial Engineering Ltd.
PA
9
True to the Music
Bassbone OD™