Goodmans 4225MP3 Instruction Manual page 11

ID3 TAG INFORMATION OF AN MP3 DISC (FOR SPECIFIC MP3/WMA DISC)
The information of the current track on an MP3 CD is shown in the display automatically
track number and elapsed time press the Display button. Press the Display button again to return the
ID3 tag information display
1. Stop CD playback by pressing the CD STOP button.
2. Press the OPEN/CLOSE button to open the CD tray.
3. Gently remove the disc, press DISC 1-3 buttons to rotate the CD trays.
4. Close the CD tray by pressing the CD Open/Close button again.
5. Place the discs back in their protective storage boxes.
DISC BUTTONS (DISC 1, DISC 2, DISC 3)
—
If the Disc Tray is opened, press press the relevant button to select a desired disc.
—
During normal playback or in CD stop mode, press any one of these buttons and playback will skip
to the specified disc and start automatically if the disc selected is valid.
Load 1, 2 or 3 discs into the CD player.
To programme tracks for playback, follow the steps described below:
1. When in stop mode press the PROGRAM/MEMORY button, "MEMORY" will be shown on the
display and the DISC # Indicator will flash in the display.
2. Press DISC 1, DISC 2, DISC 3 buttons and SKIP/TUNING buttons to select the disc and track to
be programmed.
3. Press the PROGRAM/MEMORY button to enter the selected track into memory. P-01, P-02 ...... P-
40 indicate which memory the track will be stored in.
Repeat steps 2 and 3 to programme other tracks; up to 40 tracks can be stored into memory.
4. Press the PLAY/PAUSE button to play the programmed sequence of tracks.
NOTE: The DISC SELECT buttons will be disabled during Programme playback.
5. Press the STOP/MEMORY DOWN button to erase the programmed tracks from memory.
The Repeat feature allows you to play one track, one disc or all discs repeatedly.
Operations are as follows:
AUDIO CD:
1. To repeat one track, press the REPEAT/MEMORY UP button once.
2. To repeat one disc, press the REPEAT/MEMORY UP button twice.
3. To repeat all discs, press the REPEAT/MEMORY UP button three times.
4. To cancel repeat, press the REPEAT/MEMORY UP button until the repeat indicator is removed from
the display.
MP3/WMA:
1. To repeat one track, press the REPEAT/MEMORY UP button once.
2. To repeat the current directory, press the REPEAT/MEMORY UP button twice.
3. To repeat one disc, press the REPEAT/MEMORY UP button three times.
4. To repeat all discs, press the REPEAT/MEMORY UP button four times.
4. To cancel repeat, press the REPEAT/MEMORY UP button until the repeat indicator is removed from
the display.
.
REMOVING A DISC
PROGRAMMED DISC PLAY
REPEAT DISC PLAY
- 10 -
, to display the