Important Safety Information; Location Of Controls And Functions - Goodmans MICRO 1465i User Manual

IMPORTANT SAFETY INFORMATION

CAUTION
CLASS 1 LASER PRODUCT
Use of contents, adjustments to the performance or procedures other than those specified herein may
result in hazardous radiation exposure.
LASER SAFETY
This unit employs a laser. Only qualified service personnel should attempt repair.
DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED.
AVOID
DIRECT EXPOSURE TO BEAM.
CAUTION: HAZARDOUS LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
Some dos and don'ts on the safe use of equipment
This equipment has been designed and manufactured to meet European safety standards, but like any
electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
Do read these operating instructions before you attempt to use the equipment. Do ensure that all
electrical connections (including the mains plug, extension leads and interconnections between pieces
of equipment) are properly made in accordance with the manufacturer's instructions.
Switch off and remove the mains plug when making or changing any connections.
Do consult your dealer if you are ever in doubt about the installation, operation or safety of your
equipment.
Don't continue to operate the equipment if you are ever in doubt about it working normally, or if it is
damaged in any way. Switch it off, withdraw the mains plug and consult your dealer.
Don't remove any fixed covers as this may expose you to dangerous voltages.
Don't leave the equipment switched on when it is unattended, unless it is specifically stated that it is
designed for unattended operation or has a standby mode.
Switch off using the switch on the equipment and make sure that other people in your household are
conversant with the equipment. Special arrangements may need to be made for infirm or handicapped
people.
Don't listen to headphones at high volume; as such use may permanently damage your hearing.
Don't obstruct the ventilation vents on the equipment, for example with curtains or soft furnishings.
Overheating will cause damage and shorten the life of the product.
Don't allow electrical equipment to be exposed to rain or moisture.
Above all
- Never let anyone, especially children, push anything into holes, slots or any other opening, as this
could result in a fatal electric shock.
- Never guess or take chances with electrical equipment of any kind.
- It is better to be safe than sorry.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE
THE ENCLOSURE. DO NOT OPEN THE CABINET.
REFER ALL SERVICING TO QUALIFIED PERSONNEL
- 4 -

LOCATION OF CONTROLS AND FUNCTIONS

Main Unit
1. Socket
2. REMOTE SENSOR
3. Front Lens
4. SD/MMC CARD SLOT
5. STANDBY Button
6. PROG/CLK ADJ Button
7. TUNER/BAND Button
8. Button
9. CD/USB/SD Button
10. OPEN/CLOSE Button
11. AUX IN Socket
12. Earphone Socket
13. DISPLAY
14. PLAY/PAUSE/PRESET- Button
15. STOP/PRESET+ Button
16. USB Port
17. PLAY MODE/ST/MO Button
18. VOLUME Buttons
19. EQ Button
20. /TUNING and /TUNING
21. CD Door
22. STANDBY Indicator
23. FM Wire Antenna
24. VIDEO OUT Socket
25. AUDIO OUT Sockets
26. SUBWOOFER Output Socket
27. RIGHT Speaker Terminal
28. LEFT Speaker Terminal
29. AC Power Cord
Y. RESET Switch
Buttons
- 5 -