Compact Disc Care; Fault Finding - Goodmans GMC1042MP3 Instruction Manual

Table of Contents

Advertisement

Compact Disc Care

CD Handling
When handling CDs:
-
Do not touch the recorded surface.
-
Do not stick paper, or write, on either
side of the CD.
-
Do not bend the CD.
CD Storage
To avoid scratches/damage, always put
-
CDs back in their cases, after use.
-
Do not expose CDs to direct sunlight,
high temperature/humidity, for long
periods.
Cleaning CDs
When cleaning CDs:
-
Use a soft cloth, to wipe fingerprints
and dust from the disc surface.
-
Wipe in a straight line from the centre to
the outside of the disc. Small dust particles
and light stains, will not affect playback.
-
Never use benzene, thinners, record
cleaner fluid, or antistatic spray to clean
CDs.
Care of the CD Micro system
Cleaning
-
Always unplug the product before you
clean it.
-
Do not use liquid or aerosol cleaners.
-
Clean your product with a soft, damp
(not wet) cloth.
Ventilation
- Do not block or cover ventilation slots.
Blocking of ventilation slots, may lead to
overheating of the product.

Fault Finding

Product will not operate.
-
Ensure product is connected to the
mains supply and switched ON.
-
Ensure the POWER button has been
pressed.
No sound
-
Ensure speakers are properly
connected.
-
Adjust volume level.
-
Check, headphones are not plugged in.
Poor radio reception
-
Ensure aerial is positioned to receive
best signal.
-
Adjust tuning to improve reception.
-
Possible interference from electrical
equipment (e.g. Television). Reposition
product, to reduce interference.
No sound/poor sound quality from CD
player
-
Ensure CD is correctly loaded, label
side up.
-
Ensure CD is free from dust, dirt or
scratches. CD may require
replacement.
-
Condensation on optic lens. Wait 30
minutes, then retry operation.
-
CD skipping. Ensure CD is free from
dust, dirt or scratches, clean CD.
Ensure product is not subject to vibrati
14

Advertisement

Table of Contents
loading

Table of Contents