Menu Timer; Programming And Cancelling Keys; Credit Management; Account Cloud - AMC KX Series Installer Manual

menu timer

The panel has a system timer, for arm and disarm, for enable and disable outs, for enable and disable users.
During the autoarming will start a extra time of 1 minutes, after this time will start the exit time.
During in exit time is possible stop the autoarming by insert code level 2.
It is possible set the timer for auto arming in a sequence of arming with sequential hour:
For example:
- first try to arm at 8:00
- second try to arm at 9:00
- third try to arm at 10:0
In this way if the user stop the first sequence by code, the panel will try with second try to arm after 1 hour.
In autorming mode, the panel will arm only if all condition are ok:
- All zone ready
- No error or fault
In case of zones not ready, and/or some Tamper or fault, the system will not arm, and the same time will send the notification of
fail arm.
With autoarming is not possible bypass zone.
The user level 2 can stop all operation by timer:
- Enter code level 2
- with vertical arrows go to menu timer
- press enter for modify parameter: (0 = timer disabled, 1 = timer enabled)
When the timer is set on 0, all operation are stopped.

programming and cancelling keyS

The Master user can program the key of tag reader for all user:
Selected the PROGRAMMING KEYS menu, confirm with ENTER, select the user by using the vertical arrow keys, send the learning
command by pressing ENTER, 15" countdown will start during which the LEDs on the READER will flash and the user must place
a key close to the READER when the code is learned, the led stop, and in keypad diplayed succesfull.
PROGRAM KEY
Cancellation is done in exactly the same manner as programming. Once the user to be cancelled is selected, press ENTER to confirm
cancellation.

credit management

In this menu is it possible enter the parameters for sending the credit request SMS.
A specific menu "TEL. provider" and "SMS provider" can be used to enter data for Other Mobile Phone Providers.
For Check the correct value of SIM credit, is important that the KEYWORD be entered. The keyword is a word immediately before
number of credit value, in the SMS sent by provider. The Credit value is always updated each time the control unit performs a data
CMS call or sends an sms. The message received from the provider containing the credit value will be shown directly on the display.
Credit threshold is the minimum level credit before send the info. (default is 3€ or other currency)
menu network

account cloud

I this menu are all parameter that used for registartion to the cloud. ( for APP)
username:it used for name ID, the same name must be inserted to the APP during to the registration panel
password: password, the same password must be inserted to the APP during to the registration panel
uiD CODe: this code is most important because is the unique identification code of panel. Must be inserted to the APP with all
number and characters iDentiCal.
nOte:it is possible have the same password and username with different uiD in the same aPP (main house, beach
house etc.)
enable cloud: the cloud service must be enabled for have APP and push in real time, the cloud is used for remote programming
too.
system name: is only the name of panel, in 1 app it is possible program more panels with diffrent name
www.amcelettronica.com
User Nr 01
Insert Key
by 15 sec.
85
KX series v.1.70