Board Description; K4 Terminals; Up1 And Jp2 Jumper On Board - AMC KX Series Installer Manual

main board k4 - k8 - k8pluS
2
The main board is the core of the system, all modules are be connected to it, plug the card directly or via RS-485 serial bus.
The following characteristics:

board deScription

k4

k4 terminalS

BATTERY + - = battery recharge terminals
L1 - L2 = ATS2 phone line terminal outs (carrier out)
T1 - T2 = terminals for internal local telephones (home telephones user)
AC = main power by transformer 18Vac (available 25VA - 30VA)
Z1-Z2-Z3-Z4 = zones
COM = negative reference for zones
PC = adpater socket for programming pc software
AP = Tamper line with negative reference
LOADS (+ -) = power supply AUX 13.8 Vcc for external device (eg. sirens)
A B = (RS 485) = bus terminals for peripheral connection (see chapter fo bus connection)
PROPRIETARY AND CONFIDENTIAL
ALARM (nc - no - com) = terminal for siren, free relay contact
OUT1 = PGM programmable open-collector output 100mA max current
EXP = socket for plug modules (XGSM, GPRS, IP boards)
TAMPER connector = for mechanical antiopening tamper (option)
2
Led on board:
HOOK LED = red color led is in ON when panel take PSTN line (PSTN HOOK on)
PSTN STATUS LED:
- STEADY YELLOW: phone line in standby stautus (no problems)
- FLASHING YELLOW : PSTN calling status
Jp1 and Jp2 Jumper on board
these jumpers must remain open
Are used for updating the firmware and total reset of the parameters. The guide for these is in the tool for upgrade FW panel.
www.amcelettronica.com
NEXT ASSY USED ON
APPLICATION
UNLESS OTHERWISE SPECIFIED:
DRAWN
DIMENSIONS ARE IN INCHES
TOLERANCES:
CHECKED
FRACTIONAL
ANGULAR: MACH BEND
ENG APPR.
TWO PLACE DECIMAL
THREE PLACE DECIMAL
MFG APPR.
Q.A.
INTERPRET GEOMETRIC
TOLERANCING PER:
COMMENTS:
MATERIAL
FINISH
DO NOT SCALE DRAWING
19
NAME
DATE
ERRORE:COMP
ERRORE:DrawnBy ERRORE:DrawnDate
ERRORE:CheckedBy
ERRORE:CheckedDate
ERRORE:EngAppDate
ERRORE:EngineeringApproval
ERRORE:ManufacturingApproval ERRORE:MfgAppDate
ERRORE:QAAppDate
ERRORE:QAApproval
KX series v.1.70
1
<COMPANY NA
TITLE:
SIZE DWG. NO.
A
K4
ER
SCALE: 1:1
1