Arming Lock Menu - AMC KX Series Installer Manual

arming lock menu

System activation is blocked by several situations that can compromise security. These situations are, in particular:
- no main power (no 230Vac)
- Low batteries in the control unit
- Anti-opening protection activated (tamper)
- manipulation protection activated (Tamper line)
-Tamper peripheral protection (radio, wired, ext.)
- Comunication failed with one or more peripherals connected to the bus
- No GSM network
- interconnection fail (peripheral problems on th bus)
- wireless lost life test
- Fail of PSTN telephone line
These blocks can be momentarily disabled to perform tests or other operations.
Note: Installations without these blocks are to be considered not in compliance with E 50131-1 and EN 50131-3 certifications.
In the figures the parameters can be changed to stop the system
arming block.
0 = unlocked
1 = locked
www.amcelettronica.com
ARMING LOCK
No220V
ARMING LOCK
Battery
ARMING LOCK
Tamper
ARMING LOCK
Line Tamper
ARMING LOCK
Periph. Tamper
ARMING LOCK
NoGsm
ARMING LOCK
interconnection
ARMING LOCK
Wirel. Inactiv
ARMING LOCK
NoPstn
63
1
1
1
1
1
1
1
1
1
KX series v.1.70