Enable Installer Access; Enable Remote Management; Change Code Menu; Activate Programmed Outputs - AMC KX Series Installer Manual

enable inStaller acceSS

The rules of EN standards require that a user level 3 need permission of user level 2 for enter in programming menu panel.
This parameter is ENABLE INSTALLER ACCESS. When this parameter is set to 1, the installer can enter in programming menù.
Use personal code (level 2) and with down arrow go to parameter ENABLE INSTALLER ACCESS,Press enter and set 1 to allow.
(0=not allowed)

enable remote management

For programming panel with software PC, is necessary enable the system.
There are 2 ways for prgramming panel:
1 = local programming with usb cable and adapter socket
2 = remote internet programming via cloud
Use personal code (level 2) and with down arrow go to parameter ENABLE TELEMANAGEMENT, Press enter and set:
0 = FOR DISABLE PROGRAMMING SOFTWARE (ONLY KEYPAD)
1 = LOCAL PROGRAMMING SOFTWARE
2 = REMOTE INTERNET PROGRAMMING VIA CLOUD (when this option is enabled, the app no working)
TELEMANAGEMENT

change code menu

Every user (level 2) can change its own code.
Use personal code (level 2) and with down arrow go to parameter CHANGE PERSONAL CODE, Press enter and set new code.
Is important set another code, with same length of characters, in case of error system do not permit to save new code.
note: with MASTER code (particular level code) it is possible modify all user level 2 codes.
PERSONAL CODE
date/time menu
Set the date and time on this menu
Enter the menu, press ENTER to change
Press ENTER again to enter the day of the week (1 for Mon, 2 for Tue...0 for sun)
Press the Right arrow to enter the day/month/year/hours/minutes in sequence Confirm with enter

activate programmed outputS

The control unit has a system with a synoptics panel for quick activation of the outputs associated to a user code. Once entered in
the output activation menu, press ENTER and go to the associated outputs. Use the vertical arrow keys to activate and deactivate.
The figures to the side show the output activation screens. The
outputs that can be activatedare only those showing 0=deacti-
vated and 1=activated.
All outputs marked with a dash cannot be activated because
they are programmed with other functions.
Once you have entered the activation menu, use the horizontal
arrow keys to move from one output to the other and the vertical
arrow keys to activate or deactivate
(up arrow = activate, down arrow = deactivate)
Shortcut
The system has quick keys (SHORTCUT) with which to active some signals and outs.
Panic shortcut: panel has 2 type, silent with G2 and G3, press in the same time for 2 seconds, siren with G1 and G4.
activation outputs shortcut: it is possible program and link the outs direct to the number button of kepad, when this button is
press and hold for few seconds, the outs turn status and dipslay show the operation.
1
www.amcelettronica.com
ENABLE
CHANGE
garden light
activate
TELEMANAGEMENT
Enabled
CODE: User Nr 01
111111
[05] name output 05
0 - - - 0 - - - - - - - - - -
[05] name output 05
0 - - - 1 - - - - - - - - - -
1
garden light
deactivate
84
1
ACTIVATE
OUTPUTS
KX series v.1.70