Peripherals Menu; Light Plus Terminal Programming - AMC KX Series Installer Manual

peripheralS menu

Menu used to activate the peripheral devices attached to the bus:
- keypads
- tag reader
- remote input modules
- remote output modules
- radio modules
- GSM module
- IP1 internet board
Important: enable only the peripherals actually connected to the RS 485 bus
The peripheral assignment logic is represented with a square activated in the related menu while a dot means the peripheral is not
enabled (fig.)
As you can see in the figure, keypads 1 - 2 - 3 are enabled while the rest are not.
- digit the installer code
- Use the vertical arrow keys to select the specific menu (see title)
- Press ENTER to enter. Select the specific menu using the vertical arrow keys.
- Press and confirm with ENTER until the peripheral cursor flashes
- Use the horizontal arrow keys to select the number of the desired peripheral
- Use the CANCEL key to select/unselect
- Confirm with ENTER
- Use the # or ESC. key to exit the menu
repeat the operation for all types of peripherals you wish to enable
For keypads and tag reader, you can enable the buzzer in various ways:
K = key sound
< = Input times
> = Output Time
A = Chime
The enabling method is the same. In the example in the figure, the key sound was enabled along with the input and output times.
k light pluS terminal programming
K light has 2 terninal on board that be used like input and or outputs. For programming these teminal is necessary select the fol-
lowing menu from peripheral menu:
When is selected (by press enter) one terminal, that start to blink, with vertica arrow is possible select if that terminal will be input
or output and the postion (see figure)
In the figure above the terminal 1 is a input in 09 place, the terminal 2 is input at place 22
In the figure above the terminal 1 is a input in 09 place, the terminal 2 is an output at place 05
After this configuration go in the input and/or output parameter and program like a normal zone or output
www.amcelettronica.com
Keypad
ON/OFF
Keypad 01
Sound
In / Out Keypad 01
1 - OFF
In / Out Keypad 01
1- IN 09 2- IN 22
In / Out Keypad 01
1- IN 09 2- OUT 05
12345678
2 - OFF
39
K<>A
KX series v.1.70