Mercedes-Benz CL2012 Operator's Manual page 61

X
Fold upholstery cover = and the Velcro
fastener upwards.
X
Turn installation aid ? to a vertical position
to prevent upholstery cover = from folding
down.
X
Install the LATCH-type (ISOFIX) child
restraint systems on both securing
rings ;. Comply with the manufacturer's
instructions when installing the LATCH-
type (ISOFIX) child restraint system.
Top Tether
Top Tether provides an additional connection
between the child restraint system secured
with ISOFIX and the rear seat. It helps reduce
the risk of injury even further.
The Top Tether anchorage points are located
in the rear compartment behind the head
restraints.
X
Remove respective covering cap : of the
Top Tether anchorage.
X
Place covering cap : in a suitable place
(e.g. in the glove box).
Children in the vehicle
X
Move the head restraint upwards.
X
Route Top Tether belt ? under the head
restraint between the two head restraint
bars.
X
Hook Top Tether hook = of Top Tether
belt ? into Top Tether anchorage ;.
Ensure that:
Top Tether hook = is hooked into Top
R
Tether anchorage ; as shown.
Top Tether belt ? is not twisted.
R
Top Tether belt ? can move freely
R
between the rear seat backrest and the
head restraint.
X
Install the LATCH-type (ISOFIX) child
restraint system with Top Tether. Comply
with the manufacturer's installation
instructions when doing so. Make sure that
Top Tether belt ? is tight.
The child restraint system with Top Tether
belt ? has been removed:
X
Slide covering cap : onto Top Tether
anchorage ;.
I n f o r m a t i o n P r o v i d e d b y :
59
Z